| Processeur |
- Support for AM3/AM2+/AM2 processors: AMD Phenom™ II processor/ AMD Phenom™ processor/AMD Athlon™ II processor/ AMD Athlon™ processor/AMD Sempron™ processor
* If you install AMD AM3/ AM2+ CPU on AM2 motherboard, the system bus speed will downgrade from HT3.0 (5200MT/s) to HT1.0 (2000 MT/s) spec; however, the frequency of AM3/ AM2+ CPU will not be impacted. Please refer "CPU Support List" for more information. |
| Hyper Transport |
- 2000 MT/s
|
| Chipset |
- NVIDIA® GeForce 7025/nForce 630a chipset
|
| Mémoire |
- 2 x 1.8V DDR2 DIMM sockets supporting up to 8GB of system memory (Note 1)
- Dual channel memory architecture.
- Support for DDR2 1066/800/667/533 MHz memory modules
* DDR2 1066 is supported with combination of AM3/ AM2+ processors and qualified memory modules, please refer "Memory Support List" for detail memory support information. |
| Audio |
- Realtek ALC888B codec
- High Definition Audio
- 2/4/5.1/7.1-channel (Note 2)
- Support for S/PDIF In/Out
- Support for CD In
|
| Réseau |
- Onboard Realtek RTL8211CL (10/100/1000Mbit)
|
| Port d'expansion |
- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x1 slot
- 2 x PCI slots
|
| Interface de Stockage |
NVIDIA® GeForce 7025/nForce 630a chipset
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 4x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
- Support for RAID 0, RAID 1, RAID 5, RAID 10 and JBOD
iTE IT8718 chip:
- 1 x floppy disk drive connector supporting up to 1
- floppy disk drive
|
| USB |
Integrated in the NVIDIA® GeForce 7025/nForce 630a chipset
- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
|
| Connecteurs d'entrées/sorties internes |
- 1 24-pin ATX power connector
- 1 4-pin ATX 12V power connector
- 1 floppy connector
- 1 IDE connectors
- 4 SATA 3Gb/s connectors
- 1 CPU fan connector
- 1 system fan connector
- 1 front panel connector
- 1 front panel audio connector
- 1 x surround/center audio header
- 1 CD In connector
- 1 SPDIF In/Out connector
- 2 USB 2.0/1.1 connectors for additional 4 USB 2.0/1.1 ports by cables
- 1 Chassis Intrusion connector
- 1 Power LED connector
|
| Connecteur du Panneau Arrière |
- 1 PS/2 keyboard port
- 1 PS/2 mouse port
- 1 parallel port
- 1 x serial port
- 1 x D-Sub port
- 4 USB 2.0/1.1 ports
- 1 RJ-45 port
- 3 audio jacks (Line In / Line Out / MIC In)
|
| Contrôleur d'Entrée/Sortie |
- iTE IT8718 chip
|
| Monitorage Matériel |
- System voltage detection
- CPU / System temperature detection
- CPU / System fan speed detection
- CPU / System warning temperature
- CPU / System fan failure warning
- CPU fan speed control (Note 3)
|
| BIOS |
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOSTM
- PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
|
| Autres Caractéristiques |
- Supports @BIOS
- Supports Q-Flash
- Support for Xpress BIOS Rescue
- Supports Download Center
- Supports Xpress Install
- Supports Xpress Recovery2
- Supports EasyTune(Note 4)
|
| Logiciels Fournis |
- Norton Internet Security (OEM version)
|
| Système d'Exploitation |
- Support for Microsoft Windows Vista/XP
|
| Dimensions |
- Micro ATX form factor; 24.4cm x 22.5cm
|
| Note |
(Note 1) Due to Windows Vista/XP 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) A 5.1/7.1 surround cable (optional) needs to be installed if you wish to enable 7.1-channel audio output.
(Note 3) Whether the CPU fan speed control function is supported will depend on the CPU cooler you install.
(Note 4) Available functions in EasyTune may differ by motherboard model. |
| Remarque |
- Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
- Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.
|
